The high quality aluminium casing of this motogadget motoscope tiny speedo is made from solid metal and its surface is anodized black. The casing is also 100% water-tight and resistant to vibrations.
motogadget motoscope tiny dial is indirectly illuminated by white LEDs. The innovative LED display is hidden behind the black part of the dial and only visible through the dial while operating, not when switched off. Moreover, the LED luminosity is automatically adjusted in order to achieve optimal readability in dark, sunlight and dawn conditions.
If the speed exceeds the 200 km/h on the analogue scale, it is automatically displayed in the LED display. The 4 indicator lights (blue, red and 2 x green) are also integrated into the dial. These lights are only visible when operated, too.
Default value on the display is the time, however, you can toggle between the different informations on the LED display by the menu push-button. If needed, a quick click of the push-button will display total distance, day trip, on-board voltage etc.
This speedo is easy to install with the two M3 threaded holes on the back side.
The supplied speedometer sensor in stainless steel is very small (M5/23 mm) and therefore is easy to hide. The sensor can be easily installed on front or rear wheel with the connector cable (1.5 m long). This allows for the easy conversion of an originally mechanical speedometer drive on a motorcycle.
motogadget motoscope tiny works well with various original speedometer sensors of motorcycle manufacturers. In this case, the terminals have to be connected only and the mechanical sensor installation will be completely obsolete.
We have installed motogadget motoscope tiny on our BMW R100 RS project. Click here to check it out!
Mounting Diameter 49 mm
Weight approx. 96 g
Mount 2 x M3 threaded hole
Power consumption approx. 200 mA (load dependent)
Operating voltage 9 V – 15 V
Speedometer, analogue (indicator) 0 – 200 km/h or mi/h
Speedometer, numeric (LED display) 200 – 999 km/h or mi/h
Trip meter 0 – 999.99 km or mi
Total distance (adjustable) 99999 km or mi max.
Indicator lights turn signal, high beam, neutral, hazard light
motogadget motoscope tiny with approx. 75 cm connector cable
2 removable fuses
9 cable end connectors
Speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable
2 powerful mini magnets
2 mounting screws M3 with washer
2 diodes for pairing of turn signals
Detailed installation and operating instructions